show tcp-check - Command Equivalents

Ze command

Registry path: show tcp-check
Usage: show tcp-check <host> <port> [source <source>] [timeout <timeout>]
Mode: Read-only
Wire method: ze-show:tcp-check
Backends: any backend
Task support: optional: the MCP call is synchronous, which is the default
Subcommands: none: this command takes no subcommand
Pipes, always: json, ndjson, table, text, yaml, raw, no-more, save
Pipes, when the answer has rows: match, count, first, last, display, fill
Pipes, while streaming: log
Pipes, local process only: save

Description

Tries to open a TCP connection and reports success or failure with the
connection time. Use 'source <IP>' to bind a specific local address. Quick way
to verify a peer's BGP port is reachable.

Arguments

Name	Type	Required	Values	Summary	Description
`host`	string	yes	any value of this type	Target host.	An IP address or a DNS name of at most 253 characters, which the dialer resolves. The answer echoes it in the host key.
`port`	uint	yes	any value of this type	Target port.	The TCP port to connect to, from 1 to 65535. Ze joins it to the host and dials that one endpoint.
`source`	string	no	any value of this type	Source IP address.	A local IP address the connection binds to before it dials. An address the host does not hold makes the dial fail. Absent, the kernel picks the source.
`timeout`	string	no	any value of this type	Connection timeout.	How long the dial waits before it reports timeout, from 1s to 30s. The default is 5s.

Mapping status

No vendor equivalent has been curated yet for this Ze command.

Juniper Junos MX

No equivalent is listed for this vendor yet.

Cisco IOS XR

No equivalent is listed for this vendor yet.

Nokia SR OS

No equivalent is listed for this vendor yet.

VyOS

No equivalent is listed for this vendor yet.