show probe-round - Command Equivalents

Ze command

Registry path: show probe-round
Usage: show probe-round [dest <dest>] [probes <probes>] [max-hops <max-hops>] [timeout <timeout>]
Mode: Read-only
Wire method: ze-show:probe-round
Backends: any backend
Task support: optional: the MCP call is synchronous, which is the default
Subcommands: none: this command takes no subcommand
Pipes, always: json, ndjson, table, text, yaml, raw, no-more, save
Pipes, when the answer has rows: match, count, first, last, display, fill
Pipes, while streaming: log
Pipes, local process only: save

Description

Sends all probes concurrently for faster results than sequential traceroute.
Returns per-hop RTT and IP. Use probes and max-hops to tune accuracy vs speed.

Arguments

Name	Type	Required	Values	Summary	Description
`dest`	string	no	any value of this type	Target host or IP address.	The value is the first bare word of the command. A host name is resolved in either address family, and the family of the answer selects ICMPv4 or ICMPv6.
`probes`	uint	no	any value of this type	Number of probes per hop.	The value is accepted in the range 1 to 10 and then not read: a probe round sends one probe at each time-to-live.
`max-hops`	uint	no	any value of this type	Maximum number of hops.	The value is the largest time-to-live Ze probes, 1 to 64. Absent, or set to 30, the round probes 16 hops.
`timeout`	string	no	any value of this type	Timeout duration.	The value is accepted in Go duration syntax, 1s to 30s, and then not read: a probe round waits one second for every answer.

Mapping status

No vendor equivalent has been curated yet for this Ze command.

Juniper Junos MX

No equivalent is listed for this vendor yet.

Cisco IOS XR

No equivalent is listed for this vendor yet.

Nokia SR OS

No equivalent is listed for this vendor yet.

VyOS

No equivalent is listed for this vendor yet.