show capture - Command Equivalents

Ze command

Registry path: show capture
Usage: show capture [protocol <l2tp|bgp>] [tunnel-id <tunnel-id>] [count <count>] [peer <peer>]
Mode: Read-only
Wire method: ze-show:capture
Backends: any backend
Task support: optional: the MCP call is synchronous, which is the default
Subcommands: interface raw
Pipes, always: json, ndjson, table, text, yaml, raw, no-more, save
Pipes, when the answer has rows: match, count, first, last, display, fill
Pipes, while streaming: log
Pipes, local process only: save

Description

Returns protocol messages you previously enabled capture for. Without a
protocol keyword, shows all protocols. Use this to debug session establishment
issues.

Arguments

Name	Type	Required	Values	Summary	Description
`protocol`	enum	no	`l2tp` `bgp`	Protocol filter.	Restricts the answer to one protocol key. Absent, the answer carries an l2tp key and a bgp key, each holding its messages or 'capture not enabled'.
`tunnel-id`	string	no	any value of this type	L2TP tunnel ID filter.	Keeps only the L2TP messages of the tunnel with this local tunnel ID. The BGP messages are not affected.
`count`	uint	no	any value of this type	Maximum number of messages.	At most this many messages are returned for each protocol. Absent or 0, every buffered message is returned.
`peer`	string	no	any value of this type	Peer address filter.	Keeps only the messages exchanged with this peer address, for L2TP and BGP alike.

Mapping status

No vendor equivalent has been curated yet for this Ze command.

Juniper Junos MX

No equivalent is listed for this vendor yet.

Cisco IOS XR

No equivalent is listed for this vendor yet.

Nokia SR OS

No equivalent is listed for this vendor yet.

VyOS

No equivalent is listed for this vendor yet.