show capture raw - Command Equivalents

Ze command

Registry path: show capture raw
Usage: show capture raw [action <start|stop|dump>] [protocol <l2tp|bgp>] [format <pcap|json>] [count <count>]
Mode: Read-only
Wire method: ze-show:capture-raw
Backends: any backend
Task support: optional: the MCP call is synchronous, which is the default
Subcommands: none: this command takes no subcommand
Pipes, always: json, ndjson, table, text, yaml, raw, no-more, save
Pipes, when the answer has rows: match, count, first, last, display, fill
Pipes, while streaming: log
Pipes, local process only: save

Description

Actions: start (begin capturing), stop (halt), dump (retrieve). Protocols:
l2tp, bgp. Output formats: pcap (for Wireshark), json. Limit with count <N>.

Arguments

Name	Type	Required	Values	Summary	Description
`action`	enum	no	`start` `stop` `dump`	Capture action.	The verb the command performs. It is required, and a call without one is refused with the usage line.
`protocol`	enum	no	`l2tp` `bgp`	Protocol to capture.	Narrows the action to one protocol. Absent, the action applies to every protocol with a raw capture, and the answer carries one key for each.
`format`	enum	no	`pcap` `json`	Output format.	Read by dump alone. The default is json. With pcap the answer carries a <protocol>-pcap key holding the base64 file and a <protocol>-packets count.
`count`	uint	no	any value of this type	Maximum number of messages.	Read by dump alone. At most this many messages are returned for each protocol. Absent or 0, every captured message is returned.

Mapping status

No vendor equivalent has been curated yet for this Ze command.

Juniper Junos MX

No equivalent is listed for this vendor yet.

Cisco IOS XR

No equivalent is listed for this vendor yet.

Nokia SR OS

No equivalent is listed for this vendor yet.

VyOS

No equivalent is listed for this vendor yet.