One running router, eight live configuration topics 0. Migrate an actual ExaBGP neighbor configuration: ze exabgp migrate /src/demos/terminal/showcase/exabgp.conf Read the resulting bgp group and peer, remote address and AS numbers. This previews migration; it does not replace the lab's active configuration. 1. Connect to the base lab over SSH. Exit configuration mode, open monitor bgp, press s to sort by ASN, then q to return to the operational prompt. The transit and FRR peers are established before any feature is committed. 2. RPKI: add cache and validation binding live. Compare Valid, NotFound and Invalid routes; explain the ROA, stop the cache, diagnose and restore it. 3. IRR: query a local test server, bind AS-TEST and import filtering live. Prove accepted and refused routes; diagnose a wrong AS-SET and restore it. 4. BFD: add a profile and opt-in to the established FRR BGP peer. Cut its link, show BFD diagnostics and BGP history, restore the link and the sessions. 5. OSPF: add the area and interface. Follow Full adjacency through the router database to the loopback route. Diagnose a Hello mismatch and restore it. 6. IPsec: load IKE, ESP, authenticated peer/selectors and XFRM route in one candidate. Prove negotiated and kernel SPIs with protected-host traffic. Mismatch ESP alone, diagnose NO_PROPOSAL_CHOSEN without calling IKE down, restore the matching ESP group, clear the peer SAs and prove traffic again. 7. VRRP: add the gateway and uplink tracking. Observe master, tracked-link demotion and reduced priority; stop the companion master to show failover while the shown Ze stays running. Restore the companion and tracked link. 8. Traffic usage: attach accounting live, identify the heavy source and port, stop the burst, and observe recovery without changing forwarding. 9. Commit confirmed: leave a risky hostname change unconfirmed, observe its automatic rollback, then explicitly accept the next change and prove it stays. 10. Recap: the same daemon received each live commit, diagnostic and recovery. Every topic uses its standalone recording's configure.tape and show.tape. The showcase is recorded as one continuous session, not assembled from casts. See each topic transcript for the commands, topology and vendor references. BGP vendor mapping: FRR show bgp summary displays session state; Ze's monitor bgp adds the interactive live view used here. https://docs.frrouting.org/en/latest/bgp.html#clicmd-show-ip-bgp-all-summary-wide-json Ordered visible commands from the continuous tape and its shared topic fragments: $ ze-demo card showcase intro $ ze exabgp migrate /src/demos/terminal/showcase/exabgp.conf $ ze-demo card showcase bgp $ sshpass -e ssh ze-demo ze# exit ze> monitor bgp ze> exit RPKI live configuration, outage diagnosis and recovery: $ ze-demo card topic-rpki lab ze# load file absolute merge /src/demos/terminal/topics/rpki/1-cache.conf ze# load file absolute merge /src/demos/terminal/topics/rpki/2-policy.conf ze# load file absolute merge /src/demos/terminal/topics/rpki/3-attach.conf ze# show | compare ze# commit now $ ze cli -c 'show bgp rpki status | yaml | no-more' $ ze cli -c 'show bgp adj-rib-in | yaml | no-more' $ ze-demo run showcase-lab control rtr-cache stop $ ze cli -c 'show log recent component bgp.rpki level warn count 3 | yaml | no-more' $ ze-demo run showcase-lab control rtr-cache start $ ze cli -c 'show bgp rpki status | yaml | no-more' IRR live configuration, wrong AS-SET and repaired route decisions: $ ze-demo card topic-irr lab ze# load file absolute merge /src/demos/terminal/topics/irr/1-server.conf ze# load file absolute merge /src/demos/terminal/topics/irr/2-as-set.conf ze# load file absolute merge /src/demos/terminal/topics/irr/3-import.conf ze# show | compare ze# commit now $ ze cli -c 'show bgp irr check customer 10.0.0.0/24 | yaml | no-more' ze# load file absolute merge /src/demos/terminal/topics/irr/4-wrong-as-set.conf ze# commit now $ ze cli -c 'show bgp irr prefix customer | yaml | no-more' ze# load file absolute merge /src/demos/terminal/topics/irr/2-as-set.conf ze# commit now $ ze cli -c 'update bgp irr as-set AS-TEST | yaml | no-more' $ ze-demo run showcase-lab control customer reannounce $ ze cli -c 'show bgp adj-rib-in | no-more' BFD opt-in, link failure and session recovery: $ ze-demo card topic-bfd overview ze# load file absolute merge /src/demos/terminal/topics/bfd/1-profile.conf ze# load file absolute merge /src/demos/terminal/topics/bfd/2-peer.conf ze# show | compare ze# commit now $ ze cli -c 'show bfd session address 172.29.0.2 | no-more' $ ze-demo run showcase-lab control frr down $ ze cli -c 'show bgp peer 172.29.0.2 history | no-more' $ ze-demo run showcase-lab control frr up $ ze cli -c 'show bfd session address 172.29.0.2 | no-more' OSPF adjacency, Hello mismatch diagnosis and recovery: $ ze-demo card topic-ospf overview ze# load file absolute merge /src/demos/terminal/topics/ospf/1-area.conf ze# load file absolute merge /src/demos/terminal/topics/ospf/2-interface.conf ze# show | compare ze# commit now $ ze cli -c 'show ospf neighbor detail | no-more' $ ze cli -c 'show ospf route | no-more' ze# load file absolute merge /src/demos/terminal/topics/ospf/3-mismatch.conf ze# commit now $ ze cli -c 'show metrics name ze_ospf_packets_dropped_total label interface frr0 label reason hello-interval | no-more' ze# load file absolute merge /src/demos/terminal/topics/ospf/4-recovery.conf ze# commit now $ ze cli -c 'show ospf neighbor detail | no-more' $ ze cli -c 'show ospf route | no-more' IPsec live tunnel, proposal mismatch and protected traffic recovery: $ ze-demo card topic-ipsec lab ze# load file absolute merge /src/demos/terminal/topics/ipsec/1-ike.conf ze# load file absolute merge /src/demos/terminal/topics/ipsec/2-esp.conf ze# load file absolute merge /src/demos/terminal/topics/ipsec/3-peer.conf ze# load file absolute merge /src/demos/terminal/topics/ipsec/4-xfrm.conf ze# show | compare ze# commit now $ ze cli -c 'show vpn ipsec dataplane sa | no-more' $ ze-demo run showcase-lab control vpn ping ze# load file absolute merge /src/demos/terminal/topics/ipsec/5-mismatch.conf ze# commit now $ ze cli -c 'show vpn ipsec peer name responder | no-more' $ ze cli -c 'show log recent level warn | match NO_PROPOSAL_CHOSEN | last 1 | yaml | no-more' $ ze cli -c 'show vpn ipsec dataplane sa | yaml | no-more' $ ze cli -c 'show vpn ipsec dataplane drift | yaml | no-more' ze# load file absolute merge /src/demos/terminal/topics/ipsec/2-esp.conf ze# commit now $ ze cli -c 'clear vpn ipsec sa peer responder | no-more' $ ze-demo run showcase-lab control vpn ping $ ze cli -c 'show vpn ipsec dataplane sa | no-more' VRRP tracked preference, reduced-priority takeover and recovery: $ ze-demo card topic-vrrp overview ze# load file absolute merge /src/demos/terminal/topics/vrrp/1-group.conf ze# load file absolute merge /src/demos/terminal/topics/vrrp/2-tracking.conf ze# show | compare ze# commit now $ ze cli -c 'show vrrp interface name zeptrk0 | no-more' $ ze-demo run showcase-lab control tracked-uplink down $ ip link show zetrk1 $ ze-demo run showcase-lab control keepalived stop $ ze cli -c 'show vrrp interface name zeptrk0 | no-more' $ ze-demo run showcase-lab control keepalived start $ ze-demo run showcase-lab control tracked-uplink up $ ze cli -c 'show vrrp statistics | no-more' Traffic accounting, heavier senders and settled counters: $ ze-demo card topic-traffic overview ze# load file absolute merge /src/demos/terminal/topics/traffic/1-accounting.conf ze# load file absolute merge /src/demos/terminal/topics/traffic/2-interface.conf ze# show | compare ze# commit now $ ip netns exec traffic-peer ping -c 3 -W 2 10.77.0.1 $ ze cli -c 'show traffic usage name traffic0 | no-more' $ ze-demo run showcase-lab control traffic burst $ ze cli -c 'show metrics name ze_traffic_usage_ingress_bytes_total label interface traffic0 label src_ip 10.77.0.2 | no-more' $ ze-demo run showcase-lab control traffic stop $ ze cli -c 'show traffic usage name traffic0 | no-more' Confirmed commit rollback and explicit acceptance: $ ze-demo card topic-commit-confirmed lab ze# load file absolute merge /src/demos/terminal/topics/commit-confirmed/1-trial-host.conf ze# show | compare ze# commit confirmed 8 ze# show system host ze# show system host ze# show | compare ze# show | changes ze# load file absolute merge /src/demos/terminal/topics/commit-confirmed/2-confirmed-host.conf ze# show | compare ze# commit confirmed 15 ze# commit accept ze# show system host ze# exit ze> exit $ ze cli -c "show config history $ZE_CONFIG_DIR/ze.conf | yaml | no-more" $ ze-demo card topic-commit-confirmed recap $ ze-demo card showcase recap